| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2025 302 16 19 13 Motor #3: appears stuck with a reference sensor activated. | 2 | 1 | B30225.194 | ALERT | #194 | 03:56:24 | 1 | -1 |
| Serial | YYYYJJJ | HG large | max correction |
|---|---|---|---|
| 194 | 2025302 | 3 | 42.0 |
| Serial | YYYYJJJ | HP large | max correction |
|---|---|---|---|
| 194 | 2025302 | 1 | 70.0 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2025 302 16 19 13 Reset No -> Tepid from 2025 302 16 16 44 until 2072 302 16 19 07 . Counts: 1,0 | 1 | 3 | B30225.194 | ALERT | #194 | 03:56:20 | 1 | -1 | |
| rl: | 2025 302 16 19 13 Checksum bad in low level command. | 1 | 3 | B30225.194 | ALERT | #194 | 03:56:21 | 1 | -1 | |
| rl: | 2025 302 16 19 13 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B30225.194 | ALERT | #194 | 03:56:24 | 1 | -1 | |
| rl: | 2025 302 16 19 14 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B30225.194 | ALERT | #194 | 03:56:26 | 1 | -1 |
| _jday | _loc | _serial | _skc | dt | ed | hg | hp | rs | sl |
|---|---|---|---|---|---|---|---|---|---|
| 302 | ALERT | #194 | ecsc,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 96.13099),Next schedule will be ecsc (now ecsc ZS= 93 ZS= 96.206) | 2 | 2 | 17 | 14 | 2 | 8 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 194 | 10.2 | 1.6 |