| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2025 288 16 58 28 Motor #3: appears stuck with a reference sensor activated. | 1 | 1 | B28825.194 | ALERT | #194 | 04:04:16 | 1 | -1 | |
| fz: | Brewer failed to respond 5 times | 1 | 1 | B28825.194 | ALERT | #194 | 16:58:04 | 1 | -1 |
| Serial | YYYYJJJ | HG large | max correction |
|---|---|---|---|
| 194 | 2025288 | 6 | 42.0 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2025 288 16 58 27 Reset No -> Tepid from 2025 288 16 55 10 until 2064 252 10 30 06 . Counts: 1,0 | 1 | 3 | B28825.194 | ALERT | #194 | 04:04:12 | 1 | -1 | |
| rl: | 2025 288 16 58 28 Checksum bad in low level command. | 1 | 3 | B28825.194 | ALERT | #194 | 04:04:14 | 1 | -1 | |
| rl: | 2025 288 16 58 28 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B28825.194 | ALERT | #194 | 04:04:16 | 1 | -1 | |
| re: | Azimuth discrepancy = -115 | 1 | 99 | B28825.194 | ALERT | #194 | 04:14:38 | -115 | -30 | 30 |
| _jday | _loc | _serial | _skc | dt | ed | fz | hg | rs | sl | uv |
|---|---|---|---|---|---|---|---|---|---|---|
| 288 | ALERT | #194 | ecsc,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.029) | 2 | 2 | 33 | 18 | 2 | 8 | 27 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 194 | 10.2 | 1.6 |