| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2022 115 18 19 44 Reset No -> Tepid from 2022 115 18 19 26 until 2074 115 18 19 39 . Counts: 1,0 | 1 | 3 | B29722.194 | Toron | #194 | 09:52:31 | | 1 | -1 |
| rl: | 2022 115 18 19 45 Checksum bad in low level command. | 1 | 3 | B29722.194 | Toron | #194 | 09:52:33 | | 1 | -1 |
| rl: | 2022 115 18 19 45 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B29722.194 | Toron | #194 | 09:52:36 | | 1 | -1 |
| rl: | 2022 115 18 19 45 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B29722.194 | Toron | #194 | 09:52:39 | | 1 | -1 |
| rl: | 2022 115 18 21 54 MAIN.C : motor initialization timed out. | 1 | 5 | B29722.194 | Toron | #194 | 09:52:41 | | 1 | -1 |
| rl: | 2022 115 18 21 54 New value set for watermark SUPPLY.VOLTAGE.LOW[HV]: 1304.271221 Volts. | 4 | 3 | B29722.194 | Toron | #194 | 09:52:44 | | 1 | -1 |
| ze: | Zenith discrepancy = 111 | 1 | 99 | B29722.194 | Toron | #194 | 13:59:22 | 111 | -10 | 10 |
| hg: | DEL key pressed | 2 | 99 | B29722.194 | Toron | #194 | 15:03:00 | | 1 | -1 |
| dsp: | Doing dispersion test with Hg (UV port) | 2 | 99 | B29722.194 | Toron | #194 | 17:46:01 | | 1 | -1 |
| checkhg: | Last HG had to adjust the micrometer by at least 1 | 1 | 99 | B29722.194 | Toron | #194 | 18:26:13 | | 1 | -1 |
| ap: | HOME key pressed | 1 | 99 | B29722.194 | Toron | #194 | 20:28:50 | | 1 | -1 |
| pd: | Going to menu | 1 | 99 | B29722.194 | Toron | #194 | 20:28:52 | | 1 | -1 |
| dp: | Doing dispersion with internal HG. | 1 | 99 | B29722.194 | Toron | #194 | 21:37:09 | | 1 | -1 |