| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2018 245 05 04 02 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.699324 Volts. | 9 | 3 | B24618.194 | ALERT | #194 | 04:23:41 | 1 | -1 | |
| hg: | Lamp not on... hg test terminated F1= 2 F4= 2 | 4 | 1 | B24618.194 | ALERT | #194 | 04:50:01 | 1 | -1 | |
| hg: | Lamp not detected f1= 2 f4= 2 | 4 | 1 | B24618.194 | ALERT | #194 | 04:50:02 | 1 | -1 | |
| hg: | No intensity detected. Check PMT. | 1 | 1 | B24618.194 | ALERT | #194 | 20:52:49 | 1 | -1 |
| Serial | YYYYJJJ | HP large | max correction |
|---|---|---|---|
| 194 | 2018246 | 5 | 56.0 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2018 245 04 26 00 Reset Warm -> Tepid from 2018 245 04 25 55 until 2018 245 04 25 55 . Counts: 1,0 | 1 | 3 | B24618.194 | ALERT | #194 | 04:23:39 | 1 | -1 | |
| rl: | 2018 246 07 09 45 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec. | 2 | 3 | B24618.194 | ALERT | #194 | 04:23:59 | 1 | -1 | |
| rl: | 2018 246 07 09 45 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec. | 2 | 3 | B24618.194 | ALERT | #194 | 04:23:59 | 1 | -1 | |
| zs: | ZS intensity too low ( 213/cy), skipping. | 4 | 99 | B24618.194 | ALERT | #194 | 06:14:58 | 1 | -1 |
| _jday | _loc | _serial | _skc | aode | ds | dt | ed | fz | hg | hp | rs | sl | uv | zs |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 246 | ALERT | #194 | ecsc | 74 | 74 | 1 | 1 | 20 | 5 | 14 | 1 | 5 | 78 | 46 |
| Operator | Serial |
|---|---|
| 17 | 194 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 194 | 2.8 | 0.4 |