| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| sc: | SC intensity too low ( 376/cy), skipping. | 1 | 3 | B17218.194 | ALERT | #194 | 00:50:34 | | 1 | -1 |
| rl: | 2018 172 21 04 59 Reset No -> Tepid from 2018 172 20 49 24 until 2008 172 21 04 54 . Counts: 1,0 | 1 | 3 | B17218.194 | ALERT | #194 | 04:20:53 | | 1 | -1 |
| rl: | 2018 172 21 05 00 Checksum bad in low level command. | 1 | 3 | B17218.194 | ALERT | #194 | 04:20:55 | | 1 | -1 |
| rl: | 2018 172 21 05 00 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B17218.194 | ALERT | #194 | 04:20:57 | | 1 | -1 |
| rl: | 2018 172 21 05 00 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B17218.194 | ALERT | #194 | 04:21:00 | | 1 | -1 |
| rl: | 2018 172 23 13 59 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec. | 1 | 3 | B17218.194 | ALERT | #194 | 04:21:41 | | 1 | -1 |
| ds: | HOME key pressed | 3 | 99 | B17218.194 | ALERT | #194 | 13:35:23 | | 1 | -1 |
| ds: | Going to menu | 3 | 99 | B17218.194 | ALERT | #194 | 13:35:26 | | 1 | -1 |
| az: | Azimuth discrepancy = 247 | 1 | 99 | B17218.194 | ALERT | #194 | 21:21:35 | 247 | -30 | 30 |
| si: | New SI, HC = -16, NC = -745 Old = -16 , 380 | 1 | 99 | B17218.194 | ALERT | #194 | 21:30:05 | | 1 | -1 |