| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 1992 003 15 53 09 Reset Warm -> Tepid from 2020 207 22 41 39 until 2030 332 09 22 35 . Counts: 1,0 | 1 | 3 | B21020.191 | CARE | #191 | 05:32:08 | | 1 | -1 |
| rl: | 1992 003 15 53 10 Checksum bad in low level command. | 1 | 3 | B21020.191 | CARE | #191 | 05:32:09 | | 1 | -1 |
| rl: | 1992 003 15 53 10 Motor #1: appears stuck with a reference sensor activated. | 1 | 3 | B21020.191 | CARE | #191 | 05:32:12 | | 1 | -1 |
| rl: | 1992 003 15 53 10 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B21020.191 | CARE | #191 | 05:32:14 | | 1 | -1 |
| rl: | 1992 003 15 53 11 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B21020.191 | CARE | #191 | 05:32:17 | | 1 | -1 |
| re: | Azimuth discrepancy = -1191 | 1 | 99 | B21020.191 | CARE | #191 | 14:36:49 | -1191 | -30 | 30 |
| ab_sk: | HOME key pressed | 3 | 99 | B21020.191 | CARE | #191 | 14:37:03 | | 1 | -1 |
| ds: | Going to menu | 2 | 99 | B21020.191 | CARE | #191 | 15:02:00 | | 1 | -1 |
| si: | New SI, HC = -27, NC = -465 Old = -27 , -465 | 1 | 99 | B21020.191 | CARE | #191 | 15:23:31 | | 1 | -1 |
| hg: | DEL key pressed | 1 | 99 | B21020.191 | CARE | #191 | 15:29:52 | | 1 | -1 |