| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 1992 001 05 53 39 Reset No -> Tepid from 1992 001 05 50 45 until 2030 329 23 25 18 . Counts: 1,0 | 1 | 3 | B08718.191 | TORON | #191 | 05:23:41 | | 1 | -1 |
| rl: | 1992 001 05 53 40 Checksum bad in low level command. | 1 | 3 | B08718.191 | TORON | #191 | 05:23:43 | | 1 | -1 |
| rl: | 1992 001 05 53 40 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B08718.191 | TORON | #191 | 05:23:44 | | 1 | -1 |
| rl: | 1992 001 05 53 40 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B08718.191 | TORON | #191 | 05:23:45 | | 1 | -1 |
| rl: | 2018 087 20 18 48 Bad command string. Command string buffer cleared. | 1 | 3 | B08718.191 | TORON | #191 | 05:23:56 | | 1 | -1 |
| rl: | 2018 087 20 18 48 Bad command string. Command string buffer cleared. | 1 | 3 | B08718.191 | TORON | #191 | 05:23:56 | | 1 | -1 |
| rl: | 2018 087 20 18 48 <M,,192> | 1 | 3 | B08718.191 | TORON | #191 | 05:23:57 | | 1 | -1 |
| rl: | 2018 087 20 18 48 <M,,192> | 1 | 5 | B08718.191 | TORON | #191 | 05:23:57 | | 1 | -1 |
| rl: | 2018 087 21 03 00 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec. | 1 | 3 | B08718.191 | TORON | #191 | 05:24:18 | | 1 | -1 |
| sc: | SC intensity too low ( 376/cy), skipping. | 1 | 3 | B08718.191 | TORON | #191 | 13:33:28 | | 1 | -1 |
| zs: | ZS measurement terminated | 1 | 5 | B08718.191 | TORON | #191 | 13:40:21 | | 1 | -1 |
| re: | Azimuth discrepancy = 24206 | 1 | 99 | B08718.191 | TORON | #191 | 16:18:05 | 24206 | -30 | 30 |
| dsp: | Doing dispersion test with Hg (UV port) | 2 | 99 | B08718.191 | TORON | #191 | 17:58:29 | | 1 | -1 |
| checkhg: | Last HG had to adjust the micrometer by at least 1 | 1 | 99 | B08718.191 | TORON | #191 | 18:44:09 | | 1 | -1 |
| si: | New SI, HC = -26, NC = 280 Old = -28 , 280 | 2 | 99 | B08718.191 | TORON | #191 | 20:21:22 | | 1 | -1 |