| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2024 253 17 48 16 Reset Tepid -> Tepid from 2024 253 17 47 37 until 2024 253 17 48 11 . Counts: 1,0 | 1 | 3 | B25324.190 | IZANA | #190 | 01:08:26 | | 1 | -1 |
| rl: | 2024 253 17 48 17 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B25324.190 | IZANA | #190 | 01:08:28 | | 1 | -1 |
| rl: | 2024 253 17 48 17 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B25324.190 | IZANA | #190 | 01:08:31 | | 1 | -1 |
| rl: | 2024 253 17 49 05 Reset Warm -> Warm from 2024 253 17 49 02 until 2024 253 17 49 02 . Counts: 1,1 | 2 | 3 | B25324.190 | IZANA | #190 | 01:08:35 | | 1 | -1 |
| rl: | 2024 253 18 14 06 New value set for watermark LOOP.RUN.TIME: 701.999950 millisec. | 2 | 3 | B25324.190 | IZANA | #190 | 01:08:42 | | 1 | -1 |
| rl: | 2024 253 18 14 06 New value set for watermark LOOP.RUN.TIME: 701.999950 millisec. | 2 | 3 | B25324.190 | IZANA | #190 | 01:08:42 | | 1 | -1 |
| si: | New SI, HC = 11, NC = 2095 Old = 11 , 2245 | 1 | 99 | B25324.190 | IZANA | #190 | 09:24:55 | | 1 | -1 |
| pd: | Going to menu | 4 | 99 | B25324.190 | IZANA | #190 | 12:59:48 | | 1 | -1 |
| re: | Azimuth discrepancy = 10241 | 2 | 99 | B25324.190 | IZANA | #190 | 15:03:48 | 10241 | -30 | 30 |
| hg: | DEL key pressed | 2 | 99 | B25324.190 | IZANA | #190 | 15:22:20 | | 1 | -1 |
| dsp: | Doing dispersion test with Cd (UV port) | 2 | 99 | B25324.190 | IZANA | #190 | 18:59:42 | | 1 | -1 |
| checkhg: | Last HG had to adjust the micrometer by at least 1 | 1 | 99 | B25324.190 | IZANA | #190 | 20:20:28 | | 1 | -1 |