| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
| zs: | ZS intensity too low ( 265/cy), skipping. | 2 | 99 | B20022.190 | TORON | #190 | 00:52:54 | | 1 | -1 |
| rl: | 2022 200 13 08 15 Reset Tepid -> Tepid from 2022 200 13 01 00 until 2022 200 13 08 10 . Counts: 1,0 | 1 | 3 | B20022.190 | TORON | #190 | 05:37:29 | | 1 | -1 |
| rl: | 2022 200 13 08 16 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B20022.190 | TORON | #190 | 05:37:32 | | 1 | -1 |
| rl: | 2022 200 13 08 16 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B20022.190 | TORON | #190 | 05:37:34 | | 1 | -1 |
| rl: | 2022 200 13 08 47 Reset Warm -> Warm from 2022 200 13 08 44 until 2022 200 13 08 45 . Counts: 1,1 | 1 | 3 | B20022.190 | TORON | #190 | 05:37:37 | | 1 | -1 |
| rl: | 2022 200 13 10 28 Bad command string. Command string buffer cleared. | 1 | 3 | B20022.190 | TORON | #190 | 05:37:40 | | 1 | -1 |
| rl: | 2022 200 13 10 28 Bad command string. Command string buffer cleared. | 1 | 3 | B20022.190 | TORON | #190 | 05:37:40 | | 1 | -1 |
| rl: | 2022 200 13 10 28 < | 1 | 3 | B20022.190 | TORON | #190 | 05:37:42 | | 1 | -1 |
| dp: | Doing dispersion with internal HG. | 1 | 99 | B20022.190 | TORON | #190 | 08:50:37 | | 1 | -1 |
| hp: | HOME key pressed | 2 | 99 | B20022.190 | TORON | #190 | 13:21:58 | | 1 | -1 |
| hp: | Going to menu | 2 | 99 | B20022.190 | TORON | #190 | 13:23:15 | | 1 | -1 |
| ux: | DEL key pressed | 2 | 99 | B20022.190 | TORON | #190 | 13:52:06 | | 1 | -1 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 1 | 10 | B20022.190 | TORON | #190 | 16:17:08 | | 1 | -1 |
| si: | New SI, HC = -5, NC = 100 Old = -5 , 100 | 1 | 99 | B20022.190 | TORON | #190 | 16:53:33 | | 1 | -1 |
| ds: | DS intensity too high ( 242231/cy) quitting. | 4 | 99 | B20022.190 | TORON | #190 | 18:09:17 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B20022.190 | TORON | #190 | 22:43:15 | | 1 | -1 |