| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
| rl: | 2021 084 19 38 34 Reset Tepid -> Tepid from 2021 084 19 27 39 until 2021 084 19 38 28 . Counts: 1,0 | 1 | 3 | B08421.190 | TORON | #190 | 05:38:50 | | 1 | -1 |
| rl: | 2021 084 19 38 34 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B08421.190 | TORON | #190 | 05:38:53 | | 1 | -1 |
| rl: | 2021 084 19 38 35 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B08421.190 | TORON | #190 | 05:38:56 | | 1 | -1 |
| rl: | 2021 084 19 55 06 New value set for watermark LOOP.RUN.TIME: 711.999989 millisec. | 2 | 3 | B08421.190 | TORON | #190 | 05:38:59 | | 1 | -1 |
| rl: | 2021 084 19 55 06 New value set for watermark LOOP.RUN.TIME: 711.999989 millisec. | 2 | 3 | B08421.190 | TORON | #190 | 05:38:59 | | 1 | -1 |
| rl: | 2021 085 01 09 16 New value set for watermark LOOP.RUN.TIME: 719.000006 millisec. | 2 | 3 | B08421.190 | TORON | #190 | 05:39:05 | | 1 | -1 |
| rl: | 2021 085 01 09 16 New value set for watermark LOOP.RUN.TIME: 719.000006 millisec. | 2 | 3 | B08421.190 | TORON | #190 | 05:39:05 | | 1 | -1 |
| fr: | Micrometer #1 reference found at step 9478 (+CAL)= 10498 Now set to o3 offset = 6983 | 1 | 99 | B08421.190 | TORON | #190 | 05:42:47 | 10498 | 1000 | 9000 |
| dt: | DEL key pressed | 1 | 99 | B08421.190 | TORON | #190 | 17:26:41 | | 1 | -1 |
| dsp: | Doing dispersion test with Cd (UV port) | 3 | 99 | B08421.190 | TORON | #190 | 19:32:49 | | 1 | -1 |
| checkhg: | Last HG had to adjust the micrometer by at least 1 | 1 | 99 | B08421.190 | TORON | #190 | 20:58:47 | | 1 | -1 |
| si: | New SI, HC = -7, NC = 140 Old = -7 , 140 | 1 | 99 | B08421.190 | TORON | #190 | 21:40:32 | | 1 | -1 |
| ds: | DS intensity too low ( 186/cy), skipping. | 4 | 99 | B08421.190 | TORON | #190 | 22:16:22 | | 1 | -1 |
| zs: | ZS measurement terminated | 1 | 5 | B08421.190 | TORON | #190 | 22:56:26 | | 1 | -1 |