| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| ds: | DS intensity too high ( 232497/cy) quitting. | 1 | 99 | B16818.190 | ALERT | #190 | 02:49:47 | | 1 | -1 |
| rl: | 2018 168 19 44 03 Reset No -> Tepid from 2018 168 18 50 22 until 1992 168 19 43 57 . Counts: 1,0 | 1 | 3 | B16818.190 | ALERT | #190 | 04:21:45 | | 1 | -1 |
| rl: | 2018 168 19 44 04 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B16818.190 | ALERT | #190 | 04:21:52 | | 1 | -1 |
| rl: | 2018 168 19 45 39 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.693947 Volts. | 1 | 3 | B16818.190 | ALERT | #190 | 04:22:01 | | 1 | -1 |
| rl: | 2018 168 19 47 46 Reset Warm -> Warm from 2018 168 19 47 43 until 2018 168 19 47 44 . Counts: 0,1 | 2 | 3 | B16818.190 | ALERT | #190 | 04:22:10 | | 1 | -1 |
| ds: | HOME key pressed | 1 | 99 | B16818.190 | ALERT | #190 | 12:58:02 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B16818.190 | ALERT | #190 | 12:58:12 | | 1 | -1 |
| ql: | DEL key pressed | 1 | 99 | B16818.190 | ALERT | #190 | 17:42:06 | | 1 | -1 |